EAW DSA250 & DSA230 User Manual
Page 26
Critical Dimensions:
1. Spacing between the Wall Brackets for a single loudspeaker must be
within 0.1 in / 3 mm of the dimensions in Figure 5.5.7a.
In order to lift a loudspeaker onto its wall brackets, spacing between
the top wall bracket and ceiling, or other overhead obstruction,
must be 8.5 inches minimum. NOTE: 8.5 inches allows only 0.25
inches extra clearance.
2. Spacing between the Wall Brackets for loudspeakers mounted over-
under fashion must be 4.9 inches.
3. Spacing between the Wall Brackets for loudspeakers mounted side
by side must be 5.4 inches.
4. Provide attachment hardware and secure the supplied Wall Brackets
to the mounting structure, complying with all Caution and Warning
notes in Section 5.5.1.
NOTE: The Wall Brackets have a weld nut on one side. Be sure to locate
this weld nut to the right or left such that the Retainer Bolt can be
inserted into the opposite side of the Wall Bracket after the loudspeaker
is mounted.
26
4.9 in
123.9 mm
5.4 in
136.6 mm
USER SUPPLIED
ATTACHMENT
HARDWARE
Ø 0.39 in
Ø 9.9 mm
Figure 5.5.7b Over-Under Spacing
Figure 5.5.7c Side-By-Side Spacing
Figure 5.5.7d Wall Bracket Attachment
(For illustration purpose only. Attachment
hardware selection is installer’s responsibility.)
DSA250
38.1 in
968.3 mm
DSA230
23.9 in
606.3 mm
8.5 in MINIMUM TO CEILI
NG
Figure 5.5.7a Wall Bracket Spacing