EAW DC2 - Manual

SPECIFICATIONS DC2
FEATURES
DESCRIPTION
APPLICATION
PERFORMANCE
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 [email protected] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. DC2/2 pp October 2001 Printed in USA
Frequency Response
±3 dB 56 Hz to 18 kHz
-10 dB 45 Hz
Axial Sensitivity (dB SPL, 1 watt @ 1 m)
Passive MF/HF 108
LF 100
Nominal Input Impedance (ohms)
Passive MF/HF 6
LF 4
Power Handling (watts, continuous)
Passive MF/HF 350
LF 1600
Calculated Output Limit (dB SPL @ 1 m)
Passive MF/HF Peak 139
LF Peak 138
Passive MF/HF Long term 133
LF Long Term 132
Nominal Beamwidth (degrees @ -6 dB SPL)
Horizontal 90
Vertical 40
Product Group Avalon
Configuration 3-way full-range
Powering Bi-amplified (passive MF/HF
crossover)
LF Subsystem 2x 15-in woofers, vented
MF Subsystem 1x 10-in cone, horn-loaded
HF Subsystem 1.4-in exit/3-in voice coil com-
pression driver on CD horn
Enclosure Material Exterior-grade Baltic birch plywood
Finish Wear-resistant textured black paint
Connectors 2x Neutrik NL4 Speakon
Suspension Hardware 8x 3/8”-16 threaded mounting
points (4 top, 2 per side)
Grille Zinc coated perforated steel
Dimensions inches millimeters
Height (front) 22.5 572
Height (rear) 19.3 489
Width 57.1 1449
Depth 19.0 483
Weights pounds kilograms
Net Weight 190 86.5
Shipping Weight 207 94.2
PHYSCIAL
• Dual 15-in woofers maximize LF output
• Horn-loaded 10-in cone mid frequency section with Radial
Phase Plug™
• Horn-loaded 1.4-in exit/3-in voice coil HF compression
driver
• Cutaway rear corner directs coverage down from a position
close to the ceiling
• High-output system designed to deliver the extreme level
requirements of high energy dance clubs
The DC2 is engineered for use in permanent installations. The
system includes dual 15-in woofers in an optimally vented
enclosure, a horn-loaded 10-in midrange and a 1.4-in exit/3-
in voice coil high frequency compression driver on a 90° (h)
x 40° (v) dispersion constant directivity horn.
A complex asymmetrical internal passive crossover/filter net-
work provides MF/HF subsystem integration. An MX Series
Close Coupled Processor™ should integrate the LF and MF/HF
subsystems.
The DC2 bi-amplified three-way dance club system provides
high output, high definition reinforcement for medium to
large sized clubs. Overall design is robust to ensure reliabili-
ty in the face of continuous peak output operation.
The DC2 is designed for overhead mounting in a horizontal
configuration to cover medium to large sized dance floors. It
is also very effective when used as a reinforcement system in
live music clubs. Its cutaway upper-rear corner allows it to
tuck up next to the ceiling while angling its coverage down
20°. The enclosure includes balance-optimized threaded
mounting points.
Like all EAW products, it can be special ordered in virtually
any color to match a specific décor. Six year warranty.