EAW DSA250 & DSA230 User Manual

Page 23

5 . 5 . 3

M U LT I P L E L O U D S P E A K E R S A N D C L U S T E R C O N F I G U R AT I O N S

CAUTION: Only clusters defined by the DSAPilot or pictured herein may
be used. Any other configurations will result in poor to unusable perform-
ance. In the future other configurations may be added to the DSAPilot.

In some applications, tighter MF/HF pattern control, higher output, or
narrower vertical coverage may be desirable. Where higher LF output
capability is desired, height restrictions may not permit the ideal over-
under mounting of the DSA250 and DSA230 models. Because of these
and other possible requirements, the DSAPilot allows several cluster
configurations to be used in a single or in multiple locations to
achieve various coverage and output results. See the DSA Application
Guide for details.

NOTE: Where aesthetics or other
considerations warrant, side-by-side
configurations can be mirrored
without affecting the results.

Figure 5.5.3 DSA Cluster Configurations