Solutions when the image contains noise or static, Solutions when the image is fuzzy or blurry – Epson EpiqVision Ultra LS300 3600-Lumen Full HD Ultra-Short Throw Smart Laser 3LCD Projector (Black) User Manual

Page 75

• Adjust the

Corner Adjustment

setting to correct the image shape.

Parent topic:

Solving Image or Sound Problems

Related concepts

Projector Placement

Solutions When the Image Contains Noise or Static

If the projected image seems to contain electronic interference (noise) or static, try the following
solutions:

• Check the cables connecting your computer or video source to the projector. They should be:

• Separated from the power cord to prevent interference

• Securely connected at both ends

• Not connected to an extension cable

• Select a computer video resolution and refresh rate that are compatible with the projector.

• If you adjusted the image shape using the projector controls, try decreasing the

Sharpness

setting to

improve image quality.

• If you connected an extension power cable, try projecting without it to see if it caused interference in

the signal.

Parent topic:

Solving Image or Sound Problems

Related references

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:

• Adjust the image focus.

• Clean the projection window.

Note:

To avoid condensation on the projection window after bringing the projector in from a cold

environment, let the projector warm up to room temperature before using it.

• Position the projector close enough to the screen, and directly in front of it.

• Make sure your screen is flat. Try projecting on another surface.