Controlling the volume with the volume buttons – Epson EpiqVision Ultra LS300 3600-Lumen Full HD Ultra-Short Throw Smart Laser 3LCD Projector (Black) User Manual
Page 45
45
4.
Select the
Dynamic Contrast
setting and press
Enter
.
5.
Select one of the following options and press
Enter
.
•
Normal
to adjust brightness at the standard speed.
•
High Speed
to adjust brightness as soon as the scene changes.
6.
Press the
Esc button to exit the menus.
Parent topic:
Related references
Image Quality Settings - Picture Menu
Controlling the Volume with the Volume Buttons
You can use the
Volume
buttons on the projector or the remote control to adjust the volume of your
projected content. The volume buttons control the projector’s internal speaker system or any external
speakers you connected to the projector.
You must adjust the volume separately for each connected input source.
Warning:
Do not start playback at a high volume. Sudden loud noises may cause hearing loss. Always
lower the volume before turning off the projector. Gradually increase the volume after turning the
projector on.
1.
Turn on the projector and start a presentation that includes audio.
2.
To lower or raise the volume, press the volume buttons on the projector's control panel or remote
control.
Parent topic: