Setting up the projector, Projector placement, Projector setup and installation options – Epson EpiqVision Ultra LS300 3600-Lumen Full HD Ultra-Short Throw Smart Laser 3LCD Projector (Black) User Manual

Page 20

Setting Up the Projector

Follow the instructions in these sections to set up your projector for use.

Projector Placement

You can place the projector on almost any flat surface to project an image.

Warning:

The projector is not intended to be ceiling- or wall-mounted. Do not mount the projector on a

ceiling or a wall. It could fall and cause damage or injury.

Keep these considerations in mind as you select a projector location:

• Place the projector on a sturdy, level surface.

• Leave plenty of space around and under the projector for ventilation, and do not place it on top of or

next to anything that could block the vents.

• Wherever you set up the projector, make sure to position it squarely in front of the center of the

screen, not at an angle, if possible.

• Position the projector within reach of a grounded electrical outlet or extension cord.

Parent topic:

Setting Up the Projector

Projector Setup and Installation Options

You can set up or install your projector in the following ways: