Sony FE 100-400mm f/4.5-5.6 GM OSS Lens - Manual (Page 75)

Help Guide
Wireless Stereo Headset
LinkBuds
Connecting to a paired Bluetooth device
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the Bluetooth device.
Note
When connecting, [LinkBuds], [LE_LinkBuds], or both may be displayed on the connecting device. When both or [LinkBuds] is
displayed, select [LinkBuds]; when [LE_LinkBuds] is displayed, select [LE_LinkBuds].
If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply
turning on the headset. If this is the case, deactivate the Bluetooth function on the last-connected device or turn off the power.
If you cannot connect your Bluetooth device to the headset, delete the headset pairing information on your Bluetooth device and
perform the pairing again. As for the operations on your Bluetooth device, refer to the operating instructions supplied with the
Bluetooth device.
Related Topic
Wearing the headset
Using only one unit of the headset
Remove the headset from the charging case.
The headset turns on automatically.
1
Put the headset units into both ears.
When the headset has automatically connected to the last connected device, you will hear a notification sound from
both headset units (or from the headset unit you are wearing) at the same time.
Check the connection status on the Bluetooth device. If it is not connected, proceed to step
.
2
Make the Bluetooth connection from the Bluetooth device.
As for the operations on your Bluetooth device, refer to the operating instructions supplied with the Bluetooth
device.
You will hear a notification sound from both headset units (or from the headset unit you are wearing) at the same
time.
3
75