Sony FE 100-400mm f/4.5-5.6 GM OSS Lens User Manual
Page 144
This operation resets volume settings, etc. to the factory settings, and deletes all pairing information. In this case, delete
the pairing information for the headset from the connected device and then pair them again.
If the headset does not operate correctly even after initializing, consult your nearest Sony dealer.
About the instruction manual video
Watch the video to find out how to initialize.
Hint
You can also initialize the headset with the “Sony | Headphones Connect” app.
Note
When the remaining battery charge of the charging case is not sufficient, the headset will not start initializing. Charge the
charging case.
If the indicator (green) on the charging case does not flash 4 times after performing step
, the headset has not been
initialized. Try again from step
.
If you have updated the software after purchasing the headset, the software is retained updated even if you initialize the headset.
When you initialize the headset to restore to the factory settings after you change the language of the voice guidance, the
language will also return to the factory settings.
Release your finger within 5 seconds after the indicator (orange) on the charging case starts flashing.
When the initializing is complete, the indicator (green) on the charging case flashes 4 times.
5
144