beautypg.com

Low sound quality – Sony FE 100-400mm f/4.5-5.6 GM OSS Lens User Manual

Page 132

background image

Help Guide

Wireless Stereo Headset

LinkBuds

Low sound quality

If the headset is not worn properly in your ears, tap operations or Speak-to-Chat speech detection may not work
correctly, or you may not obtain the correct sound qualities or call performance. If the part of the headset where
sound is output is not oriented correctly toward the ear canal, the sound quality may sound poor or the left and right
sound localization may sound misaligned.
If any of this is the case, check that you are wearing the headset properly in your ears.
Turn down the volume of the connected device if it is too loud.
Switch the Bluetooth connection to A2DP with the connected device when the headset and the transmitting Bluetooth
device are connected via an HFP or HSP Bluetooth connection.
If you connect the headset to the previously connected Bluetooth device, the headset may only establish the
HFP/HSP Bluetooth connection when it is turned on. Use the connected device to connect via an A2DP Bluetooth
connection.
When listening to music from a computer on the headset, the sound quality may be poor (e.g., difficult to hear the
singer’s voice, etc.) for the first few seconds after a connection is established. This is due to the computer
specifications (priority on stable connection at the start of transmission and then switches to priority on sound quality
several seconds later) and is not a headset malfunction.
If the sound quality does not improve after a few seconds, use the computer to establish an A2DP connection. As for
the operations on your computer, refer to the operating instructions supplied with the computer.

Related Topic

Wearing the headset

5-031-118-11(1) Copyright 2022 Sony Corporation

132