Sony FE 100-400mm f/4.5-5.6 GM OSS Lens - Manual (Page 73)

By closing the lid once, the headset units are straightened and locked in place, even if they were not locked in
the charging case before.
Hold the charging case in your hand and press the lid open button to open the lid. 3.
Press and hold the pairing button of the charging case for about 5 seconds.
The indicator (blue) on the charging case repeatedly flashes slowly twice in a row and the headset goes into
pairing mode.
You can remove the headset from the charging case after entering pairing mode. When you put the headset
units into both ears, you will hear a notification sound and the voice guidance say “Pairing”, from both headset
units at the same time.
4.
Perform the pairing procedure on the Bluetooth device to search for this headset.
[LinkBuds] will be displayed on the list of detected devices on the screen of the Bluetooth device.
If it is not displayed, repeat from step
.
2
Select [LinkBuds] displayed on the screen of the Bluetooth device for pairing.
If Passkey (*) input is required, input “0000”.
3
A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”. *
73