Sony FE 100-400mm f/4.5-5.6 GM OSS Lens User Manual
Page 37
About the instruction manual video
Watch the video to find out how to perform the pairing for the first time.
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the Android smartphone.
To delete all Bluetooth pairing information, see “
Initializing the headset to restore factory settings
”.
Note
If pairing is not established within 5 minutes, pairing mode is canceled. In this case, set the headset into the charging case, and
start the operation again from step
.
Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
When a 9th device is paired.
The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration
Touch the switch to turn on the Bluetooth function.
2.
Touch [LinkBuds].
If Passkey (*) input is required, input “0000”.
The headset and smartphone are paired and connected with each other.
When the headset is placed in the charging case, the indicator (blue) on the charging case flashes slowly for about
5 seconds.
When you are wearing the headset, you will hear a notification sound from both headset units at the same time.
If they are not connected, see “
Connecting to a paired Android smartphone
”.
If [LinkBuds] does not appear on the Android smartphone screen, try again from the beginning of step
.
4
A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”.
*
37