Sony UWP-D27 2-Person Camera-Mount Wireless Omni Lavalier Microphone System (UC90: 941 to 960 MHz) - Manual (Page 513)

Help Guide
Interchangeable Lens Digital Camera
ILCE-7C α7C
Zebra Setting
Sets a zebra pattern, which appears over part of an image if the brightness level of that part meets the IRE level that you
have set. Use this zebra pattern as a guide to adjust the brightness.
Menu item details
Zebra Display:
Sets whether to display the zebra pattern.
Zebra Level:
Adjusts the brightness level of the zebra pattern.
Hint
You can register values to check the correct exposure or overexposure as well as the brightness level for [Zebra Level]. The
settings for correct exposure confirmation and overexposure confirmation are registered to [Custom1] and [Custom2] respectively
in the default settings.
To check the correct exposure, set a standard value and the range for the brightness level. The zebra pattern will appear on
areas that fall within the range you set.
To check the overexposure, set a minimum value for the brightness level. The zebra pattern will appear over areas with a
brightness level equal to or higher than the value you set.
Note
The zebra pattern is not displayed on devices connected via HDMI.
5-021-699-11(1) Copyright 2020 Sony Corporation
MENU → (Camera Settings2) → [Zebra Setting] → desired setting. 1
513