Sony UWP-D27 2-Person Camera-Mount Wireless Omni Lavalier Microphone System (UC90: 941 to 960 MHz) - Manual (Page 285)

Help Guide
Interchangeable Lens Digital Camera
ILCE-7C α7C
Viewing images on a TV using an HDMI cable
To view images stored on this product using a TV, an HDMI cable (sold separately) and an HD TV equipped with an
HDMI jack are required. For details, refer to the operating instructions supplied with the compatible TV.
“BRAVIA” Sync
By connecting this product to a TV that supports “BRAVIA” Sync using an HDMI cable (sold separately), you can operate
this product's playback functions with the TV remote control.
If you connect this camera to a TV using an HDMI cable, available menu items are limited.
Turn off both this product and the TV. 1
Connect the HDMI micro terminal of this product to the HDMI jack of the TV using an HDMI cable (sold
separately).
Use an HDMI cable that is compatible with the HDMI micro terminal of the product and the HDMI jack of the TV.
2
Turn on the TV and switch the input. 3
Turn on this product.
Images shot with the product appear on the TV screen.
4
Select an image using the right/left sides of the control wheel.
The monitor of this camera is not lit up on the playback screen.
If the playback screen is not displayed, press the
(Playback) button.
5
After performing the steps above to connect this camera to a TV, select MENU → (Setup) → [HDMI Settings] →
[CTRL FOR HDMI] → [On].
1.
Press the SYNC MENU button on the TV remote control, and select the desired mode. 2.
285