Sony UWP-D27 2-Person Camera-Mount Wireless Omni Lavalier Microphone System (UC90: 941 to 960 MHz) - Manual (Page 38)

To adjust settings from the dedicated setting screens
Select the desired function in step 2, then press the center of the control wheel. The dedicated setting screen for the
function will appear. Follow the operating guide
(A) to adjust settings.
To change the functions in the function menu (Function Menu Set.)
The following is the procedure for changing [Drive Mode] in the still image function menu to [Grid Line].
To change the movie function menu, select a movie function menu item in Step 2.
Related Topic
Assigning frequently used functions to buttons (Custom Key)
5-021-699-11(1) Copyright 2020 Sony Corporation
Select the desired setting by turning the control wheel, and press the center of the control wheel.
Some functions can be fine-tuned using the control dial.
3
MENU → (Camera Settings2) → [Function Menu Set.]. 1.
Select (Drive Mode) from among the twelve still image function menu items using the top/bottom/left/right
side of the control wheel, and then press the center.
2.
Move to the [Display/Auto Review] screen using the left/right side of the control wheel. Then, select [Grid Line] and
press the center of the control wheel.
(Grid Line) will be displayed in the former location of (Drive Mode) in the function menu.
3.
38