Roland E-X50 61-Key Arranger Keyboard - Manual (Page 6)

6
Setup
This section contains information about setting up your instrument and
preparing to play. Please go through this section carefully before turning
the power on.
Power Supply
You can power the instrument by using the included power adaptor.
Turn down the volume of instrument and the connected audio equip-
ment before you switch the instrument on.
1. If the included power adaptor is interchangeable plug type, choose
the included adaptor plug that fits the type of AC outlet used in your
region.
Follow the image to put the adaptor plug into the grooves the power
adaptor unit and rotate the adaptor plug clockwise to lock.
If the included power adaptor is not interchangeable plug type, skip
this process.
2. Connect one end of the power adaptor to the DC IN jack on the rear
panel of the instrument.
3. Plug the power adaptor into an appropriate AC outlet.
4. Press the [POWER] switch, the LCD screen turns on, which indicates
the instrument is powered on.
5.
If you are ready to turn off the instrument, press and hold the [POW-
ER] switch again.
Notes:
● The power to this unit will be turned off automatically after a pre-
determined amount of time has passed since it was last used for
playing music, or its buttons or controls were operated (Auto Off
function).
If you do not want the power to be turned off automatically, disen-
gage the Auto Off function (P. 30).
● Unsaved data is lost when the power turns off. Before turning the
power off, save the data that you want to keep.
● To restore power, turn the power on again.
● For your safety, please unplug the instrument when it is not in use or
during a thunderstorm.
Setting a Music Rest
A music rest is supplied with the instrument. You can easily attach it by
inserting it into the slots at the rear of the panel.