Roland E-X50 61-Key Arranger Keyboard - Manual (Page 17)

17
Registration Memory
This function allows you to save virtually all panel settings to a regis-
tration memory, and you can instantly recall these setting by pressing a
single button.
Selecting a Registration Bank
Press the [BANK] button repeatedly to select a memory bank. The LCD
displays the current bank number.
The instrument provides 8 banks. Each bank has 4 registration memories
(button [1] - [4]).
Registering the Panel Settings
1. The memory function is turned on by default when the power is turned
on. When this function is turned off, you can press the [REGISTRA-
TION] button to turn this function on, the button LED and the “MEMO-
RY” icon on LCD light up.
2.
Press and hold the [REGISTRATION] button, then press one of the
memory buttons [1] - [4] to save the panel settings to that button.
Note: this operation will overwrite the previous data saved in that
button.
3. Parameters that can be saved to registration memory include:
Tone: main tone, dual tone, split tone, DSP effects, mixer settings.
Accompaniment: style, tempo, Chord mode.
Function: touch response, mic effect and some parameters in the
function menu.
Recalling the Registered Settings
Press one of the memory buttons [1] - [4]. It will recall the settings saved
in that button. This will reset related parameters on the control panel.
Notes:
● Registration memory cannot be recalled when the O.T.S. function is in
use.
● When power off, you can press and hold the [EXIT] and [ENTER] but-
tons and turn on the power. LCD display shows “Reset OK” and the
registration memory will be reset to factory default setting.