Roland E-X50 61-Key Arranger Keyboard - Manual (Page 28)

28
Function Menu
1. Press the [MENU] button to enter the function menu.
2.
Use the [<] / [>] button to select a parameter category. After a sec-
ond,the LCD automatically shows the parameter.
3.
Use the data dial to select a parameter. Then press the [ENTER] but-
ton to move the cursor to the lower menu to set the parameter.
4.
Use the data dial or the [EXIT] + [<] / [>] buttons to change the setting.
Press [EXIT] + [<] + [>] buttons simultaneously to restore the default
setting of the current parameter.
5.
Press the [EXIT] button to go back.
6. Press the [STYLE] or [TONE] button to exit the function menu.
Detailed parameters and their ranges:
Parameter
category
Parameter LCD display Range Description
MIXER
Music volume MusicVl 0 ~ 32 (default: 26)
You can separately adjust the volume
of each track for appropriate volume
balance.
Upper tone volume Upper1 0 ~ 32 (default: 25)
Dual tone volume Upper2 0 ~ 32 (default: 20)
Split tone volume Lower 0 ~ 32 (default: 18)
Metronome volume MetroVl 0 ~ 32 (default: 25)
Mic volume Mic Vol 0 ~ 32 (default: 12)
Percussion volume Perc 0 ~ 32
Drum volume Drum 0 ~ 32
Bass volume Bass 0 ~ 32
Accomp 1 volume Accomp1 0 ~ 32
Accomp 2 volume Accomp2 0 ~ 32
Accomp 3 volume Accomp3 0 ~ 32
Accomp 4 volume Accomp4 0 ~ 32
Accomp 5 volume Accomp5 0 ~ 32
TUNING
Tune Tune -50 ~ +50 (default: 0)
Adjust the pitch of the keyboard up or
down in a 2-cent increment.
Upper tone octave OctvR1 -2 ~ +2 (default: 0)
Shift the pitch of the specified tone
layer up or down by one octave.
Dual tone octave OctvR2 -2 ~ +2 (default: 0)
Split tone octave OctvL -2 ~ +2 (default: 1)
KEYBOARD
Touch response Touch OFF,1 ~ 3 (default: 2)
Set the velocity response of the
keyboard.
Split point SplitPt 1 ~ 61 (default: 19)
Set the split point for Split mode and
Chord mode.
Pedal function Pedal
Sustain
Soft
Memory
Sta/Stp
(default: Sustain)
Assign different functions to the
footswitch.
Sustain type Ped Rel ON,OFF (default: ON)
Set the sustain type so that it will
produce different sustain effect.
ACCOMP
Accomp volume AcmpVol 0 ~ 32 (default: 26) Adjust the accompaniment volume.
One finger key OneFKey
OFF,C,C#,D,D#,E,F,F#,G,
G#,A,A#,B (default: OFF)
Set the root note of one finger key
function.
Fade time FdTime 1 ~ 20 (default: 10) Set the fade in/out time.