Roland E-X50 61-Key Arranger Keyboard - Manual (Page 16)

16
Tempo
Metronome
1.
Press the Tempo [-] / [+] button to change the tempo. The tempo
value on LCD blinks.
2.
When the tempo value blinks, use the data dial to fast change the
tempo. Press the TEMPO [-] and [+] buttons simultaneously to restore
the default tempo.
3. You can use the [TAP] button to set the tempo.
When style stops, press the [TAP] button 5 times at an even speed, it
will start the style at the tapping speed.
When style is playing, press the [TAP] button twice, the tempo will be
reset to the tapping speed.
Notes:
● When style stops, if you change the style, the tempo will be reset to
the default tempo of the current style.
● When style is playing, if “Tempo Remain” is turned on, when you
change the style, the tempo will remain unchanged. If “Tempo
Remain” is turned off, when you change the style, the tempo will be
reset to the default tempo of the current style. You can turn the Tempo
Remain on/off in the function menu (P. 28).
The metronome provides a steady beat to help you practice at a preset
tempo.
1. Press [METRONOME] button to start the metronome. The button LED
will blink in sync with the metronome sound.
2. Press the [METRONOME] button again to stop the metronome. The
button LED turns off.
3.
The default time signature is “4”. You can change it in the function
menu.
Press the [MENU] button to enter the Function Menu, then use the [<]
/ [>] button to select the “OTHERS” menu. Use the data dial to select
the “MtrBeat” parameter, then press the [ENTER] button. Use the data
dial or the [EXIT] + [<] / [>] buttons to change the beat.
Notes:
● The metronome will respond in the next beat if it is turned on during
style playback.
● If you turn on the metronome in record mode, the metronome sound
will not be recorded.