Samsung G52A 32" 16:9 165 Hz IPS Gaming Monitor - Manual (Page 39)

39
2nd 3rd Description
Eco Saving Plus Reduce energy consumption compared to consumption at the maximum brightness level.
• Off : Deactivate the Eco Saving Plus function.
• Auto : The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
• Low : Saves up to 25 % energy compared to the maximum brightness.
• High : Saves up to 50 % energy compared to the maximum brightness.
―
S28AG70* model only.
―
This option is not available when Picture Mode is in Dynamic Contrast mode.
―
This menu is not available when Eye Saver Mode is enabled.
Off Timer Plus Off Timer • Off Timer : Turn on Off Timer mode.
• Turn Off After : The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of
hours.
―
This option is only available when Off Timer is set to On .
―
For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the product powers on. This is done in accordance
with power supply regulations. If you do not want the timer to activate, go to → System → Off Timer Plus and set Off Timer to Off .
Eco Timer • Eco Timer : Turn on Eco Timer mode.
• Eco Off After : The Eco Off After can be set between 10 and 180 minutes. The product will automatically power off after the specified time has
elapsed.
―
This option is only available when Eco Timer is set to On .
PC/AV Mode Set PC/AV Mode to AV . The picture size will be enlarged.
This option is useful when you view a movie.
―
Products with a display area of 16:9 or 16:10 are only supported.
―
If the product is in HDMI , DisplayPort mode and the screen says Check the cable connection and the settings of the source device. press the JOG button to
display the Function Key Guide screen and then select → System → PC/AV Mode → HDMI , DisplayPort → PC or AV .
―
If input source is AV device, the screen may not display properly or there is no sound. Set PC/AV Mode to AV .