Samsung G52A 32" 16:9 165 Hz IPS Gaming Monitor - Manual (Page 26)

26
Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for
the first time after purchase.
Select a language on information message and change the resolution on your PC to the optimum setting.
―
If the optimum resolution is not selected, the message will appear up to three times for a specified time even
when the product is turned off and on again.
―
If you want to set the optimum resolution for your computer, please refer to (Q&A) → “ How can I change the
resolution? ”
―
You can adjust the refresh rate according to the screen resolution by selecting Game → Refresh Rate in the
OSD menu.
―
To enable the maximum refresh rate, set Adaptive-Sync / FreeSync Premium (S27AG50*, S32AG50*,
S27AG52*, S32AG52* model only.) / FreeSync Premium Pro (S28AG70* model only / S49AG95*N model in
HDMI mode only.) to On or set Refresh Rate to 144 Hz .
―
This menu is only available when Refresh Rate is set to 165 Hz. (S27AG50*, S32AG50*, S27AG52*, S32AG52*
model only.) (in DisplayPort mode)
―
This menu is only available when Refresh Rate is set to 240 Hz. (S49AG95*N model only.) (in DisplayPort
mode)
List of graphic cards supporting HDR10 / HDR
400 / QUANTOM HDR 2000
HDR10 / HDR 400 / QUANTOM HDR 2000 is accessible only on Windows 10 systems equipped with
graphic cards that support Play Ready 3.0 Digital Rights Management (for protected HDR content). Use
graphic cards listed below for HDR10 / HDR 400 / QUANTOM HDR 2000.
• NVIDIA GeForce 1000 series or higher
• AMD Radeon™ RX 400 series or higher
• Intel UHD Graphics 600 series or higher
―
Graphic cards that support hardware-accelerated 10-bit video decoding for HDR video codecs are
recommended.
―
HDR 10 : S27AG50*, S32AG50* model only.
VESA HDR 400 : S27AG52*, S32AG52*, S28AG70* model only.
QUANTOM HDR 2000 : S49AG95*N model only.