ProSoft Technology MVI56E-61850S - Manual (Page 64)

Contents MVI56E-61850S ♦ ControlLogix Platform
User Manual IEC 61850 Server Communication Module
Page 64 of 81 ProSoft Technology, Inc.
September 4, 2014
INT
INT[0]. Value Description
PointID 12 This value must match the corresponding INT Point ID parameter in PCB
Reserved - Not used at this time
q 0 0 = Good data, No bit set, 1 = Questionable, Old data bit set
2 = Invalid, Oscillatory bit set, 3 = Old data and oscillatory bits set
EventNumber - Not used at this time
t dd/tt Date and time, Time-stamp of event
stVal 1000 Data value
REAL
REAL[0]. Value Description
PointID 13 This value must match the corresponding REAL Point ID parameter in PCB
Reserved - Not used at this time
q 0 0 = Good data, No bit set, 1 = Questionable, Old data bit set
2 = Invalid, Oscillatory bit set, 3 = Old data and oscillatory bits set
EventNumber - Not used at this time
t dd/tt Date and time, Time-stamp of event
stVal 17.17 Data value
5 Verify the acknowledged data in module memory by viewing the MVI56E-61850S
database in the PCB. For more information, see Using the Diagnostics Menu in ProSoft
Configuration Builder
6 In the Diagnostics window, click on 61850 SERVER - DATA MAPPINGS >
Control - Paths & Values. The DO values are displayed here.