ProSoft Technology MVI56E-61850S - Manual (Page 42)

Contents MVI56E-61850S ♦ ControlLogix Platform
User Manual IEC 61850 Server Communication Module
Page 42 of 81 ProSoft Technology, Inc.
September 4, 2014
3.11 Downloading the Project to the Module
In order for the module to use the settings you configured, you must download (copy) the
updated Project file from your PC to the module.
1 In the tree view in ProSoft Configuration Builder, right-click the MVI56E-61850S icon to
open a shortcut menu.
2 Choose D OWNLOAD FROM PC TO D EVICE . This opens the Download dialog box.
3 In the Download dialog box, choose the connection type in the Select Connection Type
dropdown box:
o Choose E THERNET if you are connecting to the module through the Ethernet cable.
o Choose 1756 ENBT if you are connecting to the module through CIPconnect or
RSWho.
Refer to Connecting Your PC to the Module's Ethernet Port (Page 44) for more
information.
Note: If you connected to the module using an Ethernet cable and set a temporary IP address, the Ethernet
address field contains that temporary IP address. ProSoft Configuration Builder uses this temporary IP address
to connect to the module.
4 Click T EST C ONNECTION to verify that the IP address allows access to the module.
5 If the connection succeeds, click D OWNLOAD to transfer the Ethernet configuration to the
module.