ProSoft Technology MVI56E-61850S - Manual (Page 46)

Contents MVI56E-61850S ♦ ControlLogix Platform
User Manual IEC 61850 Server Communication Module
Page 46 of 81 ProSoft Technology, Inc.
September 4, 2014
5 The module’s default IP address is 192.168.0.250. Choose an unused IP within your
subnet, and then click OK.
Important: The temporary IP address is only valid until the next time the module is initialized. For information on
how to set the module’s permanent IP address, see Ethernet Configuration.
6 Close the ProSoft Discovery Service window. Enter the temporary IP in the Ethernet
address field of the Connection Setup dialog box, then click the T EST C ONNECTION button
to verify that the module is accessible with the current settings.
7 If the Test Connection is successful, click C ONNECT . The Diagnostics menu will display
in the Diagnostics window.