ProSoft Technology MVI56E-61850S - Manual (Page 60)

Contents MVI56E-61850S ♦ ControlLogix Platform
User Manual IEC 61850 Server Communication Module
Page 60 of 81 ProSoft Technology, Inc.
September 4, 2014
INT
Event[1]. Value Description
PointID 2 This value must match the corresponding INT Point ID parameter in PCB
Reserved - Not used at this time
q 0 0 = Good data, No bit set, 1 = Questionable, Old data bit set
2 = Invalid, Oscillatory bit set, 3 = Old data and oscillatory bits set
EventNumber - Not used at this time
t dd/tt Date and time, Time-stamp of event
stVal 4321 Data value
REAL
Event[2]. Value Description
PointID 3 This value must match the corresponding REAL Point ID parameter in PCB
Reserved - Not used at this time
q 0 0 = Good data, No bit set, 1 = Questionable, Old data bit set
2 = Invalid, Oscillatory bit set, 3 = Old data and oscillatory bits set
EventNumber - Not used at this time
t dd/tt Date and time, Time-stamp of event
stVal 99.9 Data value
6 Once these values are populated, enter the number of boolean events to be sent to the
module.
7 To send the data to the module, enter 1 in the
MVI56E61850S.DATA.SOE.BOOL.WriteEvent.Trigger tag. It will reset back to 0 once
triggered.