ProSoft Technology MVI56E-61850S - Manual (Page 27)

MVI56E-61850S ♦ ControlLogix Platform Contents
IEC 61850 Server Communication Module User Manual
ProSoft Technology, Inc. Page 27 of 81
September 4, 2014
If the IP Filter is enabled, you will need to configure the IP addresses to be filtered.
1 Double-click the 61850S IP F ILTER L IST icon.
2 Click A DD R OW then E DIT R OW to enter the IP address information.
Name Range Description
Action Allow/Deny Select Allow for allowed IP or subnet for Whitelist filter type.
Select Deny for denied IP or subnet for Blacklist filter type.
IP/Subnet Enter an IPv4 address or subnet in standard dotted notation. The
candidate IP matches this entry if it matches this IP or subnet.
Subnet mask Enter an IPv4 subnet mask in standard dotted notation. The candidate
IP and the IP/subnet match if they are the same under this mask.