PLANET IKVM-17080 - Manual (Page 49)

Note: Changing the network settings of the IP-KVM might result in losing connection to it. In case
you change the settings remotely make sure that all the values are correct and you still
have an option to access the IP-KVM.
System Setting
With this option you can control if the IP-KVM should fetch
its network settings from a DHCP or BOOTP server. For
DHCP, select “dhcp” , and for BOOTP select “bootp”
accordingly. If you choose “none” then IP auto configuration
is disabled.
IP auto configuration
Preferred host name to request from DHCP server. Whether
the DHCP server takes the IP-KVM suggestion into account
or not depends on the server configuration.
Preferred host name
IP address IP address in the usual dot notation.
Subnet Mask The net mask of the local network.
In case the IP-KVM should be accessible from networks
other than the local one, this IP address must be set to
the local network router's IP address.
Gateway IP address
Primary DNS Server
IP Address IP address of the primary Domain Name Server in dot
notation. This option may be left empty, however the
IP-KVM will not be able to perform name resolution.
Secondary DNS
Server IP Address IP address of the secondary Domain Name Server in dot
notation. It will be used in case the Primary DNS Server
cannot be contacted.
43