PLANET IKVM-17080 User Manual

Page 41

Notes:

1. The output image extension file name has to be ‘iso’, e.g. CD-Rom_vir.iso.

2. You may create an ISO image size up to 650Mb (for CD-ROM). This drive would

be in read-only mode and would not allow you to write any information on this drive
but copying only. This drive would be bootable under DOS mode if the
motherboard / BIOS on the host computer support USB BOOTABLE function. For
emulating DVD Drive, please use Drive Redirection function.

3. The above information has to be given from the point of view of IP-KVM with

correct IP address and device name. Administrative permission is required as
regular user may not have the right to access. Please login as a system
administrator (or as “root” on UNIX systems).

4. The specified image file is supposed to be accessible from the IP-KVM. The

information above has to be given from the point of view of the IP-KVM. It is
important to specify correct IP addresses, and device names. Otherwise, IP-KVM
may not be able to access the referenced image file properly; leave the given file
unmounted and will display an according error message, instead. So, we
recommend to state correct values and repeat this steps if necessary.

Furthermore, the specified share has to be configured correctly. Therefore,
administrative permissions are required. As a regular user you may not have these
permissions. You should either login as a system administrator (or as “root” on UNIX
systems), or ask your system administrator for help to complete this task.