PLANET IKVM-17080 - Manual (Page 10)

2. Installation
8B
2.1 Before Installation
1. Please check all peripherals according the list before installation. To make sure of
the whole unit was not damaged and lost during shipping process. If you
encountered any problem, please contact your dealer.
2. Before installation, make sure all peripherals and computer have been turned off.
3. The standard brackets are for 500 ~ 800 mm (distance means front bracket to rear
bracket) cabinet, contact your dealer if you need longer rear brackets.
4. If your cabinet depth is above 800 to 1000 mm, please contact your dealer for the
stretch rails and replace it for your demand.
5. Reliable accessories of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to the
branch circuit.
6. The KVM and console are a little bit heavy, please prevent these devices from falling
down during the installation. That may make some people hurt and the console
damage.
9B
4