PLANET IKVM-17080 - Manual (Page 20)

Slave List
03-04:Mail Ser 4
LIST: Mail Group
PWR C# KVM NAME SVS
●
01 Mail Ser 1 Θ
●
02 Mail Ser 2 Θ
●
03 Mail Ser 3 ♁
●
04 Mail Ser 4 ♁
)
*
↑↓
: Move Space: Edit Esc: Exit
F1: Smart View Enter: Switching
F4: Auto Scan F9: System Setting
F5: Clear Name List
1 、This field provides the information of the currently connected PC. As shown in the
figure above, 03 refer to the Port Number of the Master; 04 refer the Port Number of the
Slave; and Mail Ser 4 is the name of this PC defined by Users. If a PC connects to the
Master, then the number consists of the first two digits. If a User has not given a name for
the PC, the name field will be blank.
2、This field shows the list of the Master KVM or a certain set of Slave KVM currently
displayed on the OSD. We recommend you to give a name to the Slave KVM, or else the
display after LIST: will be blank.
3、This field shows the list of connections to the KVM, and the fields are described below :
PWR: It shows the status of power supply and indicates a normal power supply for the
equipment (PC or KVM) connected to the CPU port.
C#: It shows the channel number; the CM-1204 will display 01~04; the CM-1208 will
display 01~08 and the CM-1216 will display 01~08; 09~16 (Since the screen cannot
display all at a time, therefore you can use PgUp/PgDn to switch the pages).
KVM: It shows the KVM model. If there is a number in this field, it shows that a
set of KVM connects to this port. The number 04 indicates Port 4 and 08
14