PLANET IKVM-17080 - Manual (Page 15)

12B
2.5 Web Management
If you have installed the IP-KVM on a network that enables DHCP, you can use the
PSetup to find out the IP-KVM’s IP.
1. Run "psetup_1.1.0.exe" from the CD
2. Please click on Refresh button to find your IKVM-17080/17160 in the network. You
can find the MAC address labeled on the bottom side of the IP-KVM module. MAC
address is detected as connection from computer and IP-KVM is valid through USB or
network.
3. [DHCP server available in the Network] Lanuch Web Browser and key in the IP
address of the IKVM-17080/17160. Please configure your PC to the same IP subnet as
well.
4. [DHCP server not available in the Network] Lanuch Web Browser and key in the
default IP address of the IKVM-17080/17160. If there is no DHCP server in the
network, your IKVM-17080/17160 will use IP address 192.168.0.20 as its default. Please
configure your PC to the same IP subnet as well.
5. As soon as the Web browser start up, IKVM-17080/17160 will prompt for User name
and Password. Please key in "super" and "pass".
6. You may now start to configure your IKVM-17080/17160 such as Remote Control,
Network Configuration, and so on.
9