PLANET IKVM-17080 - Manual (Page 19)

If you have modified the Hot Key for starting the OSD and are unable to
enter the OSD by pressing NumLock, then you can start the OSD by
using Port Selection Switch first, and then press F9 to enter into
the System Setting to modify the options of the OSD Entry Hot Key.
If you have modified the Hot Key for starting the OSD and are unable to enter the OSD
by pressing NumLock, then you can start the OSD by using the Port Selection Switch first,
and then press F9 to enter into the System Setting to modify the options of the OSD Entry
Hot Key.
Operation
You can operate the options by keyboard or mouse. For the keyboard operation,
besides the common Up and Down keys, there are special function keys such as Enter,
Space Bar, Function Key (F1, F4…) under the OSD remark field. For the mouse
operation, the left key refers to Enter and the right key refers to Exit. For example, move
the mouse point to your desired PC, and click the left key. The selection bar will move to
that position and then click the left key again for the execution.
You must use the keyboard to complete the two functions: Name Edit and
Password.
Switch Menu
Master List
03-04:Mail Ser 4
LIST: MASTER
PWR C# KVM NAME SVS
● 01 Admin ♁
● 02 Θ
● 03 04 Mail Group Ο
1
04 Θ
● 05 Peter ♁
● 06 08 Web Group Ο
● 07 16 Data Group Ο
08 Θ
) *
↑↓
: Move Space: Edit Esc: Exit
F1: Smart View Enter: Switching
F4: Auto Scan F9: System Setting
F5: Clear Name List
Press Enter
2
3
4
13