PLANET MH-1000 - Manual (Page 7)

Multi-Homing Security Gateway User’s Manual
Port or button Description
RESET To reset device and restore factory default settings, after
the device is fully booted, press and hold RESET until the
Status LED begins to blink.
WAN 1,
WAN2 Connect to your xDSL/Cable modem or other Internet
connection devices
LAN 1- 8 Connect to your local PC, switch or other local network
device
DC 12V Connect DC Power Adapter here (12VDC)
1.5 Specification
Product Multi-homing Security Gateway
Model MH-1000
Hardware
LAN 8 x 10/100 Based-TX RJ-45
Ethernet
WAN 2 x 10/100 Based-TX RJ-45
Performance
Firewall throughput
90Mbps
IPSec VPN throughput 30Mbps
PPTP VPN throughput 10Mbps
Maximum Concurrent
sessions
10,000
Software
Management
Web
Network Protocol and
features
Static IP, PPPoE, PPTP, Big Pond and DHCP client connection to ISP
NAT, Static Route, RIP-2
Dynamic Domain Name System (DDNS)
Virtual Server and DMZ
DHCP server
NTP
Load Balancing
Increased bandwidth of outbound and inbound trafficDNS inbound load
balance
Firewall
Srateful Packet Inspection (SPI) and Denial of Service (DoS) prevention
Packet Filter (by IP, port number and packet type)
E-mail alert and logs of attack
MAC Address Filtering
Content Filtering
URL Filtering
Java Applet/Active X/Web Proxy/Surfing of IP Address/Cookie Blocking
VPN Tunnels IPSec: 100, PPTP: 4
VPN Functions
PPTP, IPSec VPN support
DES, 3DES and AES encrypting
SHA-1 / MD5 authentication algorithm
Remote access VPN (Client-to-Site) and Site to Site VPN
IPSec, PPTP, L2TP pass through
QoS
Support DiffServ approach
Prioritization and bandwidth managed by IP, Port number and MAC address
Log and Alert
Syslog support
E-mail Alert
- 3 -