PLANET MH-1000 - Manual (Page 33)

Multi-Homing Security Gateway User’s Manual
4.2.1 ARP Table
The Address Resolution Protocol (ARP) Table shows the mapping of Internet (IP) addresses to Ethernet
(MAC) addresses. This is a quick way to determine the MAC address of your PC’s network interface to use
with the router’s Firewall – MAC Address Filter function. See the Firewall section of this chapter for more
information on this feature.
ÍÍ
No.: Number of the list.
IP Address: A list of IP addresses of devices on your LAN.
MAC Address: The Media Access Control (MAC) addresses for each device on your LAN.
Interface: The interface name (on the router) that this IP address connects to.
Static: Static status of the ARP table entry.
- NO indicates dynamically generated ARP table entries.
- YES indicates static ARP table entries added by the user.
4.2.2 Routing Table
The Routing Table displays the current path for transmitted packets. Both static and dynamic routes are
displayed.
ÍÍ
No.: Number of the list.
Destination: The IP address of the destination network.
Netmask: The destination netmask address.
Gateway/Interface: The IP address of the gateway or existing interface that this route will use.
Cost: The number of hops counted as the cost of the route.
- 29 -