4 pptp settings – PLANET MH-1000 User Manual
Page 47
Multi-Homing Security Gateway User’s Manual
4.4.2.1.4 PPTP Settings
Username:
Enter your user name.
Password:
Enter your password.
Retype Password:
Retype your password.
PPTP Client IP:
Enter the PPTP Client IP provided by your ISP.
PPTP Client IP Netmask:
Enter the PPTP Client IP Netmask provided by your ISP.
PPTP Client IP Gateway:
Enter the PPTP Client IP Gateway provided by your ISP.
PPTP Server IP:
Enter the PPTP Server IP provided by your ISP.
Connection:
Select whether the connection should Always Connect or Trigger on Demand.
- Always
Connect:
If you want the router to establish a PPTP session when starting up and to
automatically re-establish the PPTP session when disconnected by the ISP.
- Trigger
on
Demand:
If you want to establish a PPTP session only when there is a packet
requesting access to the Internet (i.e. when a program on your computer attempts to access
the Internet).
Idle Time:
Auto-disconnect the router when there is no activity on the line for a predetermined period of
time. Select the idle time from the drop down menu. Active if Trigger on Demand is selected.
IP Assigned by your ISP:
If your IP is dynamically assigned by your ISP, select the Dynamic radio button.
If your IP assigns a static IP address, select the Static radio button. This will take you to another page for
inputting the IP address information.
MAC Address:
If your ISP requires you to input a WAN Ethernet MAC, check the checkbox and enter your
- 43 -