5 big pond settings – PLANET MH-1000 User Manual
Page 48
Multi-Homing Security Gateway User’s Manual
MAC address in the blanks below.
DNS:
If your ISP requires you to manually setup DNS settings, check the checkbox and enter your primary
and secondary DNS.
RIP:
To activate RIP, select Send, Receive, or Both from the drop down menu. To disable RIP, select
Disable
from the drop down menu.
MTU:
Enter the Maximum Transmission Unit (MTU) for your network.
Click Apply to save your changes. To reset to defaults, click Reset.
4.4.2.1.5 Big Pond Settings
Username:
Enter your user name.
Password:
Enter your password.
Retype Password:
Retype your password.
Login Server:
Enter the IP of the Login server provided by your ISP.
MAC Address:
If your ISP requires you to input a WAN Ethernet MAC, check the checkbox and enter your
MAC address in the blanks below.
DNS:
If your ISP requires you to manually setup DNS settings, check the checkbox and enter your primary
and secondary DNS.
RIP:
To activate RIP, select Send, Receive, or Both from the drop down menu. To disable RIP, select
Disable
from the drop down menu.
MTU:
Enter the Maximum Transmission Unit (MTU) for your network.
Click Apply to save your changes. To reset to defaults, click Reset.
A simpler alternative is to select Quick Start from the main menu. Please see the Quick Start section of
this chapter for more information.
- 44 -