PLANET ADE-3400 - Manual (Page 51)

Field Description
root
Old Password
If you want to change the password, select the account and
enter the old password.
New Password
Enter the password to which you want to change the old
password.
Confirmed Password Enter the new password again.
User Account Table Select it, and you can change the above parameter.
3.7.5 Time Zone
Choose Admin > Time Zone, the p age shown in the following figure appears. Y ou can
configure the system time manually or get the system time from the time server.
The following table describes the parameters of this page:
Field Description
System Time Set the system time manually.
NTP Configuration
State
Select enable or disable NT P function. You need to enable
NTP if you want to configure the parameters of NTP.
Server Set the primary NTP server manually.
Server2 Set the secondary NTP server manually.
Time Zone
Choose the time zone in whic h area you are from the drop
down list.
3.8 Diagnostic
In the navi gation bar, click Diagnostic. The Diagnostic page that is displayed cont ains
Ping, ATM Loopback, ADSL and Diagnostic Test.
3.8.1 Ping
Choose Diagnostic > Ping. The page shown in the following figure appears.
51