PLANET ADE-3400 - Manual (Page 44)

3.6.2 Routing
Choose Advance > Routing, the page shown in the follo wing figure appears. The p age
that is displayed contains RIP and Static Route.
3.6.2.1 Static Route
Click Static Route in the lef t pane, the page shown in the following figure appears. This
page is used to configure the routing information. You can add or delete IP routes.
The following table describes the parameters and buttons of this page:
Field Description
Enable Select it to use static IP routes.
Destination Enter the IP address of the destination device.
Subnet Mask Enter the subnet mask of the destination device.
Next Hop
Enter the IP address of the next hop in the IP route to
the destination device.
Metric The metric cost for the destination.
Interface The interface for the specified route.
Add Route
Click it to add the new static route to the Static Route
Table.
Update
Select a row in the Static Route Table and modify the
parameters. Then click it to save the settings
temporarily.
44