PLANET ADE-3400 - Manual (Page 22)

Field Description
reserved for local management of ATM traffic).
Encapsulation Select the method of encap sulation provided by your ISP . Y ou can
select LLC/SNAP or VC-Mux.
Channel
Mode
Select the WAN connection type. You can select 1483 Bridged, 1483
MER, PPP over Ethernet (PPPoE), PPP over ATM (PPPoA), or 1483
Routed. In this example, PPPoE is selected.
PPP Settings Enter the username and password for PPP dial-up, which are provided
by your ISP.
Default Route You can select Enable or Disable.
DNS Settings

Obtain DNS Automatically : IP address is assigned by the of fice
end automatically. You need not to enter the IP address.

Use the follow ing DNS server address: If you want to enter the
DNS server address manually , select it and enter the IP addresses
of primary DNS and secondary DNS.
After finishing the configuration, click NEXT. The p age shown in the following figure
appears.
1483 Routed
In the Setup WAN Interface page, enter the correct PVC, set the channel mode to 1483
Routed.
22