PLANET ADE-3400 - Manual (Page 42)

The following table describes the parameters and buttons of this page:
Field Description
Direction Select Select the router inte rface. You can select LAN or WAN. In this
example, LAN is selected.
LAN ACL Switch Select it to enable or disable ACL function.
IP Address
Enter the IP address of the specified interface. Only the IP address
that is in the same network s egment with the IP address of the
specified interface can access the router.
Services Allowed You can choose the following services from LAN: web, telnet, ftp,
tftp, snmp, or ping. You can also choose all the services.
Add
After setting the parameters, click it to add an entry to the Current
ACL Table.
Reset Click it to refresh this page.
Set direction of the data packets to WAN, the page shown in the following figure appears.
42