PLANET ADE-3400 - Manual (Page 30)

The following table describes the parameters and buttons of this page:
Field Description
DHCP Mode
If set to DHCP Re lay, the router act s a
surrogate DHCP Server and relays the DHCP
requests and responses between the remote
server and the client.
Relay Server
Enter the DHCP ser ver address provided by
your ISP.
Apply Changes Click it to save the settings of this page.
Undo Click it to refresh this page.
3.4.1.3 DHCP Static IP
Click DHCP Static IP in the left pane, the page shown in the following figure appears. You
can assign the IP addresses on the LAN to the specific individual PCs based on their
MAC address.
The following table describes the parameters and buttons of this page:
Field Description
IP Address
Enter the specified IP address in the IP pool range,
which is assigned to the host.
Mac Address Enter the MAC address of a host on the LAN.
Add
After entering the IP address and MAC address, click it.
A row will be added in the DHCP Static IP Table.
Delete Selected
Select a ro w in the DHCP Static IP Table, then click it,
this row is deleted.
Reset Click it to reset those parameter.
DHCP Static IP Table It shows the assigned IP address based on the MAC
address.
3.4.2 WAN
Choose Network > WAN. The WAN page that is displayed contains WAN, ATM Setting,
and ADSL Setting.
3.4.2.1 WAN
Click WAN in the left pane, the page shown in the following figure appears.
In this page, you can configure WAN interface of your router.
30