PLANET ADE-3100 - Manual (Page 8)

3
3. Login
There are two levels of access rights/privileges for the Router:
l Administrator: User name admin, the administrator account has complete
read/write access on all pages (Status, Configuration, Admin Privilege, and Firewall
Configuration). Admin account also has FTP server access.
l User: User name user, the User account has read/write access to pages under the
Status and Configuration sections.
The following steps will enable you to log into the Router:
1. Launch the Web browser (Internet Explorer, Netscape, etc.).
2. Enter the LAN port default IP address (default gateway) http://10.0.0.2 in the address
bar.
3. Entry of the username and password will be prompted. Enter the default login User
Name and Password:
The default login User Name of the administrator is admin, and the default login Password
is epicrouter. The default login User Name for the non-administrator is user, and the
default login Password is password.
4. Remember my password checkbox: By default, this box is not checked. Users can
check this box so that Internet Explorer will remember the User name and Password
for future logins. It is recommended to leave this box unchecked for security purposes.
Admin and User passwords can be changed after login. Refer to Section 5.9 for User
Password configuration and Section 6.9 for Admin Password configuration for further
instruction.