PLANET ADE-3100 - Manual (Page 12)

7
Connect and Disconnect: It allows you to manually connect/disconnect the PPP
connection for each PPP interface. In other words, each PPP session can be connected
and disconnected individually.
l Connection #: Specifies the PPP session to be connected/disconnected.
l Connect/Disconnect Execute: Press this button to either connect or disconnect.
Connection status dialog will be displayed below the Execute button after it is pressed.
Sample dialog with explanation:
l PPP X: Connecting... This is displayed while the PPP session is attempting to
connect to the ISP.
l PPP X: Connect ERROR This is displayed when a connection cannot be made
due to an error.
l PPP X: is currently not connected This is displayed when a disconnect attempt
is made on a session that is not currently connected.
l PPP X: does not exist! This is displayed when a connect or disconnect attempt is
made on a session number that does not exist.
4.3 ADSL Page
The ADSL Status page shows the ADSL physical layer or link status. The information
displayed on this page is either inherent to the Router or set by the ADSL Central Office
(CO) DSLAM, neither of which cannot be changed by the user. This page contains
information that is dynamic and will refresh every 2 seconds.
Restart/Stop Execute: It allows you to stop or restart the ADSL connection by selecting
the appropriate action and clicking Execute.
Showtime Firmware Version: It displays the ADSL data pump firmware version.