PLANET ADE-3100 - Manual (Page 7)

2
2. Knowing Your Router
When selecting the location for the Router, allow room to access the connections on the
rear panel. You will want to place the Router so that you will be able to see the LED
indicators on the front panel. It may be convenient for you locate the Router near the PC
you intend to use for initial configuration of the Router.
2.1 Front Panels
Place the Router in a location that permits an easy view of the LED indicators shown in
the front panel diagram below.
READY
PWR
TX
RX
ADSL
ACT
LNK ADSL Modem Router
ADE-3100
WAN
LAN
2.2 Rear Panels
The rear panel of the Router provides access to the power adapter cord connection as
well as the port connections.
9VAC
RESET
LAN ADSL
RESET button: This button has two (2) functions:
1. When pressed and released, ADE-3100 will reboot (restart).
2. When reset button is pressed over 10 seconds and then release. ALL data will be
clear and restore ALL settings to the factory default values.
2.3 LED Indicators
LEDs Color Active Description
PWR Green ON
The power adaptor is connected to the
Modem.
READY Green Blink The system is ready to use.
ADSL Green ON ADSL connection is established.
TX Green Blink Transmitting data via ADSL link. WAN
RX Orange Blink Receiving data via ADSL link.
LNK Green ON The Ethernet connection is established.
LAN
ACT Green Blink
Transmitting data or receiving data over
Ethernet link.