PLANET ADE-3100 - Manual (Page 26)

8
point for configuration, WWW browsing (HTTP), FTP, and Telnet related packets are part
of the filter table.
IP Protocol: It is the IP Protocol name corresponding to the Protocol Number.
Protocol #: It is the IP protocol (number) through which the PPP session can be
activated. The Protocol Numbers for filters are:
l
TCP Protocol Number: 6
l UDP Protocol Number: 17
l ICMP Protocol Number: 1
l IGMP Protocol Number: 2
Port #: It is the Port through which the PPP session can be activated. The default filters
are:
l
HTTP TCP Port: 80
l FTP TCP Port: 20 and 21
l Telnet TCP Port: 23
l DNS UDP: 53
Action: You can add a rule by entering the appropriate information, selecting Add on the
Action dropdown menu, and clicking Submit. To delete an entry, you can enter the
information of an entry that already exists on the table, select Delete on the Action
dropdown menu, and click Submit.
5.4.4 PPP Miscellaneous Configuration
These options can be found on the Miscellaneous Configuration page under Admin
Privilege.
PPP Half Bridge: When PPP Half Bridge is enabled, only one PC is able to access the
Internet, and the DHCP server will duplicate the WAN IP address from the ISP to the local
client PC. Only the PC with the WAN IP address can access the Internet. System default
is Disabled.
PPP reconnect on WAN access: If enabled, the PPP session will automatically
establish a connection when a packet tries to access the WAN. System default is
Disabled.
Connect PPP when ADSL link is up: If this option is enabled, the Router will connect
the PPP session whenever an ADSL connection is established. If this option is disabled,
the PPP session will not connect whenever the ADSL Showtime is reached. System
default is Enabled.
If the PPP session is disconnected after the Disconnect Timeout, how can I
reconnect it?
Answer: You have to go to the PPP Status page, enter the correct connection number,
select the Connect option in the dropdown menu, and then click Execute. This will restart