PLANET ADE-3100 User Manual
Page 41
23
Range: 0 - 2147483647
Default: 120
6.6.1 RIP Per Interface Configuration
The RIP Per Interface Configuration page allows you to set the configuration for each
Interface (PVCs, PPP Sessions and LAN).
Interface: It allows you to choose the Interface (PVCs, PPP Sessions and LAN), for the
RIP to be configured. The available selections are: IP Ethernet 0, IP USB 0, IP PVC0...IP
PVC7, IP BridgeMux 0, and any PPP user defined sessions (maximum of 16):
Enable: It allows you to Enable (Yes) or Disable (No) the specified interface for RIP.
Supplier: It allows you to select the Supplier Mode (RIP Transmit).
l
Disabled: The supplier transmit is disabled.
l
V1 BC: The supplier transmits in RIPv1 Broadcast.
l
V2 BC: The supplier transmits in RIPv2 Broadcast.
l
V2 MC: The supplier transmits in RIPv2 Multicast.
Listener: It allows you to select the Listener Mode (RIP Receive).
l
V1: The listener receives the RIPv1 only.
l
V2: The listener receives the RIPv2 only.
l
V1+V2: This listener receives the both RIPv1 and RIPv2.
Current RIP Settings: It displays the each interface’s RIP status.