PLANET ADE-3100 - Manual (Page 10)

5
If there are no devices connected to the DHCP server, then a table will not
appear, otherwise a table listing all devices connected to DHCP server will appear on
the bottom of the page.
Ethernet Link Status: It displays the link up or down for the Ethernet connection (up if
connected, down if not connected).
USB Link Status (reserved function): It displays the link up or down for the USB
connection (up if connected, down if not connected).
4.2 PPP Page
The PPP Status page shows the status of each PPP session for each PPP interface.
This page contains information that is dynamic and will refresh every 8 seconds.
PPP interfaces can be created, modified, and deleted in the PPP Configuration
page. Refer to Section 5.4 for further information.
PPP (Point-to-Point Protocol): The table displays the following fields:
l Connection Name: This is user defined. User defined connections for PPP can
be created in PPP Configuration page.
l Interface: States the interface that is being used (PVC0 ... PVC7).
l Mode: There are two available modes for the connection:
PPP over Ethernet (PPPoE)
PPP over ATM (PPPoA)
l Status: States whether PPP connection is Connected or Not Connected.
l Packets Sent: Number of packets sent by a particular PPP Connection.
l Packets Received: Number of packets received by a particular PPP Connection.