PLANET ADE-3100 - Manual (Page 30)

12
external network). If you are entering a range of ports, this is the first port.
Public Port - End: It represents the last port number in a port range. If you only want one
port number (no port range), simply enter the same number here as in the Public Port -
Start field. The maximum number of the mapped Port is 20.
Private Port: It allows you to enter the port number of the Private Network (LAN or
internal network). In most cases, the private port number is same as public port number.
This port number cannot be seen from the WAN side.
Host IP Address: It allows you to enter the private network IP address for the particular
server.
5.7 Bridge Filtering
Bridge Filtering allows packets to be forwarded or blocked, depending on the MAC
address. The Bridge Filtering configuration page allows you to set the configuration of
MAC filtering. There can be up to 4 different Bridge Filtering configurations.
Source MAC: This is the Source MAC to block or from which to forward. See the next
page for instructions on how to configure this. The Source MAC must consist of 12
hexadecimal characters.
Destination MAC: This is the Destination MAC to block or to forward to. See the next
page for instructions on how to configure this. The Destination MAC must consist of 12
hexadecimal characters.
Type: Enter the hexadecimal number for the Ethernet type field in Ethernet_II packets.
For example, 0800 is for IP protocol. The Type must consist of 4 hexadecimal characters.