Figure 40 wds-p2p mode – PLANET WNAP-C3220 User Manual

Page 54

User’s Manual of WNAP-C3220

- 54 -

AP MAC

Enter the interconnection equipment’s MAC address.

Channel

Select the channel according to interconnection equipment’s; the

devices on the two ends must be at the same channel.

Open Scan

Click this button, the AP will scan the nearby wireless devices

automatically and display the information in the table.

Select the device which needs to bridge and the AP will add the

device’s MAC address automatically and select the corresponding

channel.

Figure 4040 WDS-P2P mode

Step 4.

After finishing the setting, click Next to enter Security Settings page as shown in

Chapter

5.3.1