PLANET WNAP-C3220 - Manual (Page 18)

User’s Manual of WNAP-C3220
- 18 -
Chapter 4. Configuring the AP
This chapter will show you how to configure the basic functions of your Wireless AP.
A computer with wired Ethernet connection to the Wireless Router is
required for the first-time configuration.
4.1 System Requirements
 PCs with a working Ethernet Adapter and an Ethernet cable with RJ-45 connectors
 PC of subscribers running Windows 98/ME, NT4.0, 2000/XP, Windows Vista / Win 7, MAC
OS 9 or later, Linux, UNIX or other platform compatible with TCP/IP protocols
 The above PC is installed with web browser
It is recommended to use Internet Explore 7.0 or above to access the Router.
4.2 Manual Network Setup - TCP/IP Configuration
The default IP address of the WNAP-C3220 is 192.168.1.1 . And the default Subnet Mask is
255.255.255.0. These values can be changed as desired. In this guide, we use all the default values
for description.
Connect the local PC to the LAN ports of the AP and then you can configure the IP address for your
PC.
In the following sections, we’ll introduce how to install and configure the TCP/IP correctly in Windows
XP. First, make sure your Ethernet Adapter is working, and refer to the Ethernet adapter’s manual if
needed.