PLANET WNAP-C3220 - Manual (Page 32)

User’s Manual of WNAP-C3220
- 32 -
Step 3. After finishing the setting, click Next to enter Security Settings page as shown in Figure 23.
Figure 23 Setup Wizard – Security Settings of WDS
 This page includes AP Security Settings and WDS Security Settings. Select one of the encryption
methods for the WDS connection.
 WDS security setting provides three encryption modes: WEP encryption, TKIP encryption and
AES encryption.
Object Description
WDS-Security Mode Disable The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect to the AP
without encryption. It is recommended strongly that you choose
one of following options to enable security.
WEP It is based on the IEEE 802.11 standard.
You can set the WEP key in ASCII code or Hexadecimal code.
Key: You can choose ASCII code (5 or 13 ASCII codes, illegal
characters like “/” are forbidden) or Hexadecimal characters (10
or 26 Hexadecimal characters).
TKIP Temporal Key Integrity Protocol, which is a kind of dynamic
encryption, is co-used with WPA-PSK, etc.